Call Statistics; Device Status - YX MOIP Series User Manual

6.1.2 Call Statistics

The screenshot below shows the call statistics information for analysis.
The status columns are specified as following:

Port : Shows the status of each SIM card slot.

Calls: Specify the total calls made out from this port since the last start up of system.

Alerted: Specify the total number of responded alerting message for all the calls made.

Connected: Specify the total number of answer from destination for all the calls made.

Consecutive Fails: Specify the consecutive fail calls.

No Carriers(NC): The carrier did not respond to the outgoing statistics

PDD: Specify the average duration to receive the response of alerting message.

ACD ASR : Display ACD and ASR for each SIM card slot

Tot CallDur: The port total calls duration used out from this port since the last start up of
system.

Clear Data: Clear all data, restart statistics.
A total summary is displayed at the bottom of the table.

6.2 Device Status

The screenshot below shows the SIP and Module status.
The status columns are specified as following:

Port No: The physical port sequence from 1 to 4/8/16/32/64.

Registration Status: Shows the port registration to SIP server infomation status.
YX Technical department
GSM/CDMA/WCDMA/4G(LTE) MOIP Gateway
~ 15 ~