Whirlpool RF385PXY5 Use And Care Manual page 24

4. Use the Hour and Minute pads to set the
desired
start time. Push the
"up" (A) or
"down"
(V) pad(s) until the correct time
shows on the display.
This example shows a desired start time
of 2 o'clock.
5. Push
the Stop Time pad. The time of
day with the colon flashing will show on
the display and STOP TIME will light up.
6.
Use the
Hour and Minute pads to set the
desired stop time.
Push
the "up"
(A)
or
"down" (V) pad(s) until the correct time
shows on the display.
This example shows a desired stop time
of 2:30. This provides a cook time of 30
minutes (the difference between the
start and stop times).
NOTE: If you do not set a stop time, the
colon will flash on the display and STOP
and COOK will flash alternately to
remind you to program a stop time or a
cook time. (See page 21 for instructions
on how to set delay start and stop
automatically using Cook Time and
Delay Start Time.)
7. Push
the Start/Enter pad. DELAY,
BAKE, and ON will light up on the
display to show that the oven is set to
start at a later time.
NOTES:
l
You can change
the
temperature or
time settings any time after pushing
the Start/Enter pad by repeating just
Steps 2 through 6.
l
The display will
show "door" and a
tone will sound once every 5 seconds
if the door is latched when you try to
ba kc/roast .
24