Surface Units And Reflector Bowls - Whirlpool RF385PCW Use & Care Manual

Surface Units and Reflector Bowls
Removing
Burn and Electrical Shock Hazard
Make sure all surface units are OFF before
removing surface units and reflector bowls.
Failure to do so can result in burns or
electrical shock.
1.
Turn off all surface units
3. Pull the surface unit straight away
from the receptacle.
2. Lift the edge of the unit opposite
the receptacle, just enough to
clear the element hold down clip,
reflector bowl and trim ring.
4. Lift out the reflector bowl and trim
ring. See "Cleaning Chart" on
page 27 for cleaning instructions.
20