Whirlpool RF385PCV Use & Care Manual page 23

Setting the Controls
Be sure the kitchen is ventilated during the Self-Cleaning cycle. This wlii
help normal smoke and heat to disappear from the room as qulckiy as
possible.
1.
Set the Oven Selector and Oven
Temperature Control on CLEAN.
The "on" Signal Light will come on.
2.
Move the Lock Lever
ail the way
to the right-the
Clean position.
3. Push in and release the Self-Clean
Button. A 3-hour Self-Cleaning
cycle will be set automatically.
The Display will count down the
time in minutes. The Auto Oven
Symbol, Self-Clean and "heating"
Signal Lights will come on.
If a cleaning cycle other than 3
hours is desired,
push in and hold
the Bake Hours Button and turn
the Set Knob to the new time up to
4 hours.
l
Use 2 hours for light soil.
l
Use 3-4 hours for moderate to
heavy soil.
I
4. The "locked" Signal Light will
come on when the oven tempera-
ture exceeds normal baking tem-
peratures. The Lock Lever must not
be moved and the door can't be
opened when the light is on.
if you
want to see Stop lime of the
Self-Cleaning cycle,
push the
Stop Time Button. Push the Self-
Clean Button to see cleaning time
again.
NOTE: The Bake Hours and Stop
Time Signal lights will flash dur-
ing the entire Self-Cleaning
cycle.
5.
After the cleaning cycle is com-
pleted,
the Auto Oven Symbol
and Self-Clean Signal Light will go
off. The Display will show the time
of day. When the "locked" Signal
Light goes off, move the Lock Lever
back to the left.
Do not force it.
Wait until it will move easily.
23