Advertisement
故障 Problem
排水和脫水故障
The washing machine does not
drain or spin
脫水時震動過大
The washing machine vibrates
a lot during the spin cycle
漏水
The washing machine leak
功能及開始/暫停顯示燈異常閃動
洗衣過程及門鎖顯示燈亮著
The "function" indicator lights
and the "START/PAUSE"
indicator light flash, while one of
the "phase in progress"
indicator lights and the "door
locked" indicator light will
remain lit in a fixed manner.
泡沫過多
There is too much foam
可能成因 / 處理方法 Possible causes / Solutions
所選程序沒有排水功能或不脫水功能。
The wash cycle does not include draining: some wash cycles require the drain phase to
be started manually.
排水軟管被壓扁扭結。
The drain hose is bent.
排水過濾器堵塞。
The drainage duct is clogged.
安裝時是否使脫水桶保持平衡。搬運用螺絲釘和包裝材料是否取下。
The drum was not unlocked correctly during installation.
洗衣機是否平衡安放，衣物放置不平均，可能洗衣桶內衣物太少。
The washing machine is not level.
是否夾於家具和牆壁之間。地面不夠平穩。
The washing machine is trapped between cabinets and walls.
檢查進水軟管緊固件是否有滲漏。
The water inlet hose is not screwed on properly.
洗滌劑投放盒是否堵塞。
The detergent dispenser drawer is blocked (for cleaning instruction).
排水軟管未能固定。
The drain hose is not fixed properly.
關掉洗衣機，將電源插頭拔下。待 1 分鐘後再重新啓動，如情況未有改善，請即與維修中心
聯絡。
Switch off the machine and unplug it, wait for approximately 1 minute and then switch it
back on again.
If the problem persists, contract the Technical Assistance Service.
洗滌劑是否適用於洗衣機？ 檢查洗滌劑盒上的標籤是「適合機洗」或「適合手洗」 ，或其他
相關語句。
The detergent is not suitable for machine washing (it should display the text "for washing
machines" or "hand and machine wash", or the like).
使用份量是否正確？過量的洗滌劑會造成太多泡沬，這並不保證衣物可以更乾淨。而且這樣
可能會引致洗衣機內的機件損壞。
Too much detergent was used.
11
Advertisement
