Husqvarna 120i Operator's Manual page 27

Recommended cutting equipment for
Canada
Following is a list of recommended cutting equipment for
the Husqvarna cordless chainsaw 120i. The listed
combination(s) of powerhead, guide bar and saw chain
meet all requirements outlined in Canadian Standards
Assosiation Z62.1-11 (Chain Saws) and Z62.3-11
(Chain Saw Kickback).
Guide bar
Length, in Chain pitch, in
14 3/8
14 3/8
Note: Depending on your model version of Husqvarna
120i, you must make sure that you put together the
correct guide bar and saw chain (0.050 gauge bar= H37
and 0.043 gauge bar= H38). The chainsaw will not
operate correctly with the incorrect combination of guide
bar and saw chain.
Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct
filing angles. We recommend you to always use a
5/32 in/4.0
37
mm
11/64 in/4.5
38
mm
Approved batteries for the product
Battery
Type
Battery capacity, Ah
Voltage, V
Weight, lb/kg
1259 - 001 - 11.07.2019
Gauge, in
0.050
0.043
80° 30°
75° 30°
4.2 (VTC4)
36
2.6/1.2
Furthermore the saw chain Husqvarna H37/H38 is
evaluated and listed as a Type C Low Kickback Saw
chain according to the provisions in Z62.3-11.
Guide bar and saw chain combinations
The following cutting attachments are approved for
Husqvarna 120i.
Saw chain
Max. nose radius Type
7T Husqvarna H37
7T Husqvarna H38
Husqvarna file gauge to restore the sharpness of the
saw chain. The part numbers are given in the table
below.
If you do not know which saw chain you have on your
product, turn to your servicing dealer.
0.025 in/
0°
0.65 mm
0.025 in/
0°
0.65 mm
BLi20
Lithium-ion
4 (HD2)
36.5
2.6/1.2
Length, drive
links (no.)
52
52
5056981-03 5795588-01
5056981-03 5795588-01
27