Krups KM785D50 Manual page 9

Grind and brew coffee maker
Table of Contents

Advertisement

Available languages

Available languages

„ Set the coffee strength. The coffee strength selector (7) is used for setting the required
coffee strength. The coffee strength selector (7) can be set to mild coffee (MILD), medium
coffee (MEDIUM) and strong coffee (STRONG) Fig. 14.
„ Place the glass carafe (17) on the heating plate (18) Fig. 16.
„ Press Grind and Brew button (1). The cup-of-coffee symbol (E) appears (Keep warm
function) Fig. 15.
„ After a few seconds, the appliance starts grinding the coffee beans and making the coffee.
„ To interrupt the process, press the Grind and Brew button (1).
„ If the process is completed, the appliance will beep and switch to keep-warm mode.
The  cup-of-coffee symbol (E) starts flashing. The appliance can be switched off by
pressing the Grind and Brew button (1) or the appliance switches off automatically after
2 hours.
Making coffee with ground coffee
Before you proceed, we would like you to focus your attention on the following notes:
„ Only use ground coffee.
„ Only use paper coffee filters or the permanent filter.
„ Fill the water reservoir (15) with the required amount of water.
„ Do not fill the water reservoir with more water than required for making the coffee.
„ Press the Release button (12) to open the filter holder Fig. 6.
„ Place a suitable paper filter or permanent filter in the coffee filter holder (10) Fig.7a or 7b.
„ Note: The appliance can only be used when the display is activated. If the display is not
activated, press any button to activate the display. The appliance is ready for use.
„ Put the required amount of coffee in the coffee filter Fig. 12.
„ Close the filter holder compartment until the Release button (12) clicks into place.
„ Place the glass carafe (17) on the heating plate (18) Fig. 16.
„ Press the Grind Off button to turn off the grinder. Then, press the Grind and Brew button
for the coffee symbol to appear (E).
„ After a few seconds, the appliance starts making the coffee.
„ To interrupt the process, press the Grind and brew button (1).
„ If the process is completed, the appliance will beep and switch to keep-warm mode.
The  cup-of-coffee symbol (E) starts flashing. The appliance can be switched off by
pressing the Grind off button (2) or the appliance switches off automatically after 2 hours.
Setting the coffee quantity
ONLY for « Grind / Brew », NOT applicable for « Grind Off ».
The coffee strength selector (7) is used for setting the required coffee strength. The coffee
strength selector (7) can be set to mild coffee (MILD), medium coffee (MEDIUM) and strong
coffee (STRONG).
Setting the coffee strength (B)
ONLY for « Grind / Brew », NOT applicable for « Grind Off ».
The coffee strength selector (7) is used for setting the required coffee strength. The coffee
strength selector (7) can be set to mild coffee (MILD), medium coffee (MEDIUM) and strong
coffee (STRONG) Fig. 14.
Note: The appliance can only be used when the display is activated. If the display is not
activated, press any button to activate the display. The appliance is ready for use.
„ Repeatedly press the coffee strength selector (7) to set the coffee strength. The coffee
strength (B) is shown on the display (8).
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents