Gill 7010 User Manual
Liquid level sensor
Hide thumbs
Also See for 7010:
- User manual (20 pages) ,
- Manual (21 pages) ,
- Quick start manual (4 pages)
Subscribe to Our Youtube Channel
Related Manuals for Gill 7010
Summary of Contents for Gill 7010
- Page 1 Liquid Level Sensor 7010 Liquid Level Sensor All variants User Manual For use with Gill 7010 Liquid Level Sensor - All Variants gillsc.com...
-
Page 2: Table Of Contents
1. Product description 1. Product description The 7010 Liquid Level Sensor is designed for use in harsh environments at extreme operating temperatures 2. Getting started where the continuous real-time liquid level monitoring of a variety of fuels, oils, chemicals, saline, and water is required. -
Page 3: Getting Started
2. Getting started A breakdown of the sensor is provided below with key measurement considerations. Please contact Gill for any additional information required. The analogue output cable has seven wires: The sensor electronics are housed in the flange, outside the measurement tank. The outer tube is placed into the measurement tank, such that will be submerged in liquid. -
Page 4: Configuration
Analogue Resolution 10 bit 10 bit A connector is required to configure the sensor with a computer. Gill Sensors & Controls Limited provide an RS232 to USB adaptor (P/N 1484-00-086). Please contact us if your require this device. Report Rate... -
Page 5: Tank Profiling
All 7010 sensors using the 1.125” UNF or 1.25” BSP fitting can be mounted using the SAE 5-bolt pattern using the supplied gasket. These sensor types can also be fitted with the supplied O-ring. The 2” NPT version has a tapered thread and is sealed as the thread is tightened onto the tank using either PTFE tape or pipe sealant (not included). -
Page 6: Parts Supplied
4.3 1.125” UNF Thread installation The sensor is supplied with both an O-ring and a Gasket. To use the supplied O-ring, the mounting hole gillsc.com gillsc.com 7010-30-086 Iss. 4 7010-30-086 Iss. 4 Copyright © Gill Sensors & Controls Copyright © Gill Sensors & Controls... -
Page 7: Bsp Thread Installation
50 Nm is achieved. gillsc.com gillsc.com 7010-30-086 Iss. 4 7010-30-086 Iss. 4 Copyright © Gill Sensors & Controls Copyright © Gill Sensors & Controls... -
Page 8: Sae 5-Bolt Installation
4.6 2” NPT Thread installation All 7010 sensors using the 1.125” UNF or 1.25” BSP fitting come with a SAE 5-bolt installation option. This The 2” NPT version of the sensor uses a tapered thread system where a seal is made to the tank as the thread installation option requires 5 holes to be tapped into the tank. -
Page 9: Specifications
10 Bar (differential and absolute) flange. The interpretation of the part number designation is outlined below. Compatible Media: Fresh Water, Saltwater, Ethylene Glycol, Gasoline, Unleaded, LRP, Diesel Please consult Gill for other liquids Seal Materials: Fluorosilicone O-rings Klingersil Gasket Ingress Protection:... -
Page 10: Maintenance, Returns & De-Commisioning
6.2 Returns If return of the sensor if required please contact Gill Sensors & Controls Limited and you will be issued with an RMA number. Please DO NOT return the sensor without having first obtained an RMA number. This will enable your sensor to be tracked and updates provided. -
Page 11: Gillsc.com
7010 Liquid Level Sensor All variants Important Notices: Gill Sensors & Controls Limited can take no responsibility for installation and/or use of its equipment if „ this is not done in accordance with the appropriate issue and/or amendment of the manual.
Need help?
Do you have a question about the 7010 and is the answer not in the manual?
Questions and answers