Table of Contents
Advertisement
DOK-MOTOR*-MCL********-PR05-EN-P
Rexroth IndraDyn L Ironless Linear Motors MCL
9.2.3
Frame size and frame length
Frame sizes
Frame lengths
For adjusting on different feed force requirements, Bosch Rexroth offers MCL
motors in a modular system in different sizes and lengths.
The designation of frame size is derived from the active height l
of MCL.
Fig. 9-4:
l
= Active magnet heigth
Fe
According to this system, the MCL modular construction system contains the
following motor frame sizes:
●
MCP015 / MCS015
●
MCP020 / MCS020
●
MCP030 / MCS030
●
MCP040 / MCS040
●
MCP070 / MCS070
Primary and secondary parts of one size are graduated additionally to differ‐
net frame sizes. The length designation of the primary part in the type code is
done via code letters, like A, B, C. The length designation of the secondary
part in the type code is given directly by the length in mm.
For detailed information about available frame sizes and lengths
refer to the type code of the motor in
page
63.
Bosch Rexroth AG
Application and construction instructions
chapter 6 "Type codes" on
99/193
and power
Fe
Advertisement
Table of Contents
