Characteristics describe values that are relevant to the use of the model under stated operating
conditions but are not covered by the model warranty.
•
Typical specifications describe the performance met by a majority of models.
•
Nominal specifications describe an attribute that is based on design, conformance testing,
or supplemental testing.
Specifications are Nominal unless otherwise noted.
Screw Terminal Wiring
Wire gauge
Signal wire
Ground wire
Length of bare wire (insulation stripped)
from one end of the wire
Screw terminal torque
Spacing between screw terminals
Physical
Top cover and strain relief screws
Top cover and strain relief screw torque
Dimensions
Weight
Environmental Guidelines
Notice
This model is intended for use in indoor applications only.
Environmental Characteristics
Temperature and Humidity
Temperature
Operating
Chassis with slot cooling
capacity ≥58 W
All other compatible chassis
2
Not all chassis with slot cooling capacity ≥58 W can achieve this ambient temperature range. Refer
to PXI chassis specifications to determine the ambient temperature ranges your chassis can achieve.
2
28 to 24 AWG
20 AWG
0.5 mm to 0.6 mm (0.020 in. to 0.025 in.)
0.5 Nm (4 lb · in.)
3.5 mm (0.14 in.)
M 2.5
0.3 Nm (2.7 lb · in.)
122 mm × 74 mm × 18 mm
(4.8 in. × 2.9 in. × 0.7 in.)
138 g (4.87 oz)
0 °C to 55 °C
0 °C to 40 °C
TB-4162 User Guide | © National Instruments | 9