Technical Data; Maintenance - Ebro MME 100 Instruction Manual

EN

Technical data

Measuring principle:
Electrode length:
Electrodes:
Measuring range:
Resolution :
Accuracy:
Auto power OFF
Battery:
Housing material:
Ambient temperature:
Ambient Relative humidity:
Dimensions:
Weight:

Maintenance

- Always keep instrument dry.
- Prevent dirt from getting in between the measuring electrodes
- Changing the test electrodes:
Unscrew electrodesand replace by new electrodes.
Application
- Remove the cap from the top side. Push the wood/building switch to the left
side during wood measurement, and building material measurement, push it to
the right side.
- Press the measuring electrodes as far as possible into the material.
- Always measure the moisture in the wood perpendicular to the fi bre structure.
- Repeated measuring yields representative measured data.
- Once the measurement is fi nished, reattach the cap on the top side and the
instrument switches itself off.
1340 - 5642 - 0709
Electrical resistance
8 mm
Integrated, replaceable
Wood: 1 – 45 %
Building material: 0.1– 2.4 %
Wood: ±1 %
Material: ±0.1 %
±3. 0%RH
After approx. 15 minutes
3 × Cr 2032, replaceable
Impact-proof plastic housing
0 - 40°C
0 – 85 %RH
139×47×25 mm
approximately 100g
MME 100
9