Lift-Up Cooktop - Whirlpool RF3365XP Use & Care Manual

I
I I
Replacing
Line up opening in the reflector
bowl with the surface unit
receptacle.
2. Hold the surface unit as level as
possible with the terminal just
started into the receptacle.
Push the surface unit terminal into
the receptacle. When the terminal
is pushed into the receptacle as
far as it will go, the surface unit will
fit into the reflector bowl.
CAUTION: Reflector bowls reflect heat back to the utenslis on the
surtace untts. They also help catch spiiis. When they are kept clean,
they reflect heat better and look new longer.
if a reflector bowl gets discolored, some of the utensils may not be
flat enough, or some may be too large tor the surface untt. in either
case, some ot the heat that's meant to go into or around a utensil
goes down and heats the reflector bowl. This extra heat can discolor
It. See "CookIng Ouide" for turther information.
Lift-Up Cooktop
1.
Lift front of cooktop at center and
swing-up the support rod.
2. Carefully lower the cooktop onto
the support rod.
3. Wipe with warm soapy water.
Use soapy steel-wool pad on
stubborn spots
14
CAUTION: Do not drop the
cooktop. Damage can
resutt to the porcelain and
the cooktom trame.
I
I