MPMC222 DAS without an OBR
If an OBR is not to be used, connect PHY A of the first host to PHY
B of the second host. On the second host, connect PHY A to the PHY
B of the third host. On the third host, connect PHY A to the PHY B
of the fourth host. Continue around the ring, connecting PHY A of
one host to PHY B of the next host until all hosts are connected.
Finally, connect the PHY A of the last host to the PHY B of the first
host. For an example of a two adapter network, refer to
Host 2
MPMC222
Front Panel
PHY B
PHY A
P1
Figure 2-5. Fiber Optic Connections for MPMC222 without OBRs
Connecting to the FDDI Network
Figure
Host 1
MPMC222
Front Panel
2
2-5.
PHY B
PHY A
P1
11723 9701
2-9