Aix Driver; System Requirements - Motorola MPMC221 Installation And Use Manual

Introduction
1

AIX Driver

System Requirements

1-2
ANSI X3T12 standards compliant
Station Management (SMT) 7.3
Programmable, partitioned, 8KB local buffer memory
FIFO buffering supports simultaneous, full speed, zero
latency PCI and FDDI data transfers
LED indicators to show attachment card and ring status
Fiber connectivity
Compliance to PCI local bus specification (Revision 2.0)
Figure 1-1 shows the MPMC221 component layout and front panel.
Figure 1-2 shows the MPMC222 component layout and front panel.
The device driver for the MC68840 Controller on the
MPMC221/MPMC222 is supplied with AIX 4.1.4 R4 or later
releases.
Minimum system requirements to operate the MPMC221/
MPMC222 are as follows:
Hardware:
Ð Power PC systems operating under AIX 4.1.4 R4 or later
Bus Architecture:
Ð The I/O interface must comply to PCI Local Bus
specification Revision 2.0 or greater
16MB total system memory