Table of Contents
Advertisement
Replacing
3. Hold the surface unit as level as
possible
with the terminal
just
started
into the receptacle.
Push
the surface unit terminal
into the
receptacle.
1. When terminal
is pushed
into the
receptacle
as far as it will go, push
down the edge
of the surface unit
opposite
the receptacle.
The ele-
ment hold down clip will keep the
surface unit from moving
around.
I
!. Line up openings
in the reflector
bowl with the surface unit recep-
tacle and the element
hold down
CAUTION: Reflector bowls reflect heat back to the utensfls on the
surface unfts. They also help catch spills. When they are kept clean,
they reflect heat better and look new longer.
If a reflector bowl gets dlscolored,
some of the utensils may not be flat
enough, or some may be too large for the surface unlt. In elther case,
some of the heat that's meant to go Into or around a utensil goes down
and heats the reflector bowl. This extra heat can discolor ft. See Cook-
Advertisement
Table of Contents
