Table of Contents
Advertisement
4-5-7. BLANKING
Adjusts the display range (BLANKING) of the top, bottom, left, and right edges of the video signal.
4-5-8. EDGE BLENDING
Adjust the edges (boundaries) of the projection screen when projecting high-resolution images by combining multiple
projectors on the left, right, top and bottom.
MODE
MARKER
RANGE
BLACK LEVEL
RESET
Example of a screen that is projected by arranging the images of 4 projectors with 2 units each vertically and horizontally.
Projected area
Projected area
4-5-9. SCREEN TYPE
Set the ratio of the screen to project.
Select from 16:10, 16:9 or 4:3.
Enables/disables the edge blending function.
Set whether to display the markers when adjusting the range and display position.
When this is turned on, when the white level is increased from [0], a green marker is displayed
for range adjustment and a red marker is displayed for display position adjustment.
Adjusts the edge blending range (width).
Adjusts the black level of non-overlapping images on the multiple screens.
Returns the edge blending adjustment value to the factory setting.
Projected area
Edge Blending area
Projected area
60
4. Using On-Screen Menu
Advertisement
Table of Contents
