Samsung AC RN DKG Series Installation Manual page 31

Even if you set the Use of drain pump (SEG8) option to 0, it is automatically set to 2 (the drain pump is used with 3
minute delay).
If you set the Maximum filter usage time (SEG18) option to a value other than 2 and 6, it is automatically set to 2
(1000 hours).
If you set the Individual control with remote control (SEG20) option to a value other than 0 to 4, it is automatically
set to 0 (Indoor 1).
Default value of Heating setting compensation (SEG21) is 5°C for 360 cassette model.
Example: When installing DPM (1 Outdoor unit with 4 indoor units)
Condition
External control Level control
Default
Disuse
Use (Indoor 3) Disuse
Use (Indoor 4)
Changing the addresses and options individually
When you want to change the value of a specific option, refer to the following table and follow the steps in Common
steps for setting the addresses and options on page 22.
Option SEG1
Function Page
Indication Details
Indication
and
0
details
Example: Changing the Buzzer control (SEG17) option of the installation options to 1 disuse.
Option SEG1
Function Page
Indication 0
Indoor 1 Indoor 2
Use 4 Not set (0)
Not set (0) Not set (0)
Use Not set (0) Not set (0)
SEG2 SEG3
Option mode to
Mode
change
Indication Details Indication
Option
D
type
SEG2 SEG3
Option mode to
Mode
change
D
SEG14 Setting
Indoor 3 Indoor 4
Not set (0)
Not set (0) Not set (0)
1~3 Not set (0)
Not set (0)
SEG4
Tens position
of the option
number
Details Indication Details
Tens
0 to F position 0 to 9
value
SEG4
Tens position
of the option
number
2 1
Result
Slave (All)
Master (Indoor 1), Slave
(Indoor 2,3,4)
Slave (All)
Master (Indoor 4), Slave
5~7
(Indoor 1,2,3)
SEG5 SEG6
Units position
of the option New value
number
Indication Details Indication
Units
New
position 0 to 9
value
value
SEG5 SEG6
Units position
of the option New value
number
7 1
Details
0 to F
31
English