Bosch series VG4-300 User Manual page 49

AutoDome Modular Camera System
To manually pan throughout the image area, move your cursor over any part of the live video.
The image area displays a directional arrow (
mouse key to pan the camera.
Digital I/O
Depending on the configuration of the IP AutoDome, the alarm relay outputs are displayed
next to the camera image. The relay on the camera allows you to operate a device (for exam-
ple a light or a door opener). To operate, click the relay symbol next to the video image, only if
alarms are not active. The symbol is yellow when the relay is activated.
Fig. 8.4 Digital I/O Panel
System and Event Logs
The System Log field contains information about the operating status of the IP AutoDome and
the connection. The Event Log contains information about alarm conditions. The following fig-
ure illustrates the System and Event logs.
Fig. 8.5 System and Event logs
Bosch Security Systems, Inc. VG4-200, VG4-300, VG4-500i Series User's Manual
Configuring and Using the IP AutoDome | en
), then press and hold the right
F01U064036 | 1.0 | 2007.01
45