Presets Menu; Learn Preset; Goto Preset - Bosch MIC SERIES 500 CAMERA 500 User Manual

MIC Series 500 Camera
Menu Item Description
LENGTH Defines how many seconds the user will be allowed to manually control the MIC for before the
menu re-opens when recording a pattern tour.
RECORD Closes the on screen menu, and starts the recording process. The user regains full control of the
MIC during the allotted LENGTH time with all of the inputs being recorded to memory for playback
at any point.
REVIEW TOUR Performs a single playback of the currently selected pattern.
5.5

Presets Menu

The Presets menu provides access to view and set 64 preset positions which are accurate to
0.08° in pan and tilt. Twelve (12) of these prepositions are set aside for Multi Alarms, 1 is for
Auto Alarm, and 1 is for the Wash Wipe position.
The preset section allows for setting or recalling any presets between 1 and 255. Although
there are only 64 positional presets available in the unit, there are a number of functions
mapped to learn preset numbers which can then be easily reached through the menu if a
given keyboard does not support presets above a certain value.
Menu Item Description
PRESET NO. Accesses a range of 1-255 customized preset shots.

LEARN PRESET

Enables the user to set a preset position.

GOTO PRESET

Accesses an existing preset.
MANUAL CONTROL Enables the user to manually control the unit for ten (10) seconds to a preset position. See
Section 5.5.3 Manual Control, page 30.
5.5.1 Learn Preset
Preset shots are saved camera positions. To set a preset position, follow these steps:
1.
2.
3.
4.
5.5.2 GOTO Preset
To go to an existing preset, follow these steps:
1.
2.
Bosch Security Systems, Inc.
MAIN MENU 1/2
MIC SETUPS
ACTIVATE FEATURE
PRESET TOUR
PATTERN TOUR
PRESETS
COMMUNICATIONS
ADVANCED SETUPS
ALARMS
Select the PRESET NO, using the joystick Up/Down.
Set the camera to the position you wish to record as the preset (using manual control,
see below).
Press Right on the LEARN PRESET title and an indication of the completion is shown.
The camera position is assigned to your selected preset number.
Select the PRESET NO, using the joystick Up/Down.
Move the joystick to the right on GOTO PRESET title. The camera will now move to the
selected preset.
..PRESETS..
PRESET NO. 1
MANUAL CONTROL
LEARN PRESET
GOTO PRESET
User's Manual
Navigating the Menus | en
F.01U.173.601 | 2.0 | 2010.11
29