Whirlpool RF3000XV Use & Care Manual page 8

Adjusting the Oven Temperature Control
Does your oven seem hotter or colder than your old oven? The temperature
of your old oven may have shifted gradually without you noticing the change.
Your new oven is properly adjusted to provide accurate temperatures. But when
comparing to your old oven, the new design may give you different results.
If after using the oven for a period of time, you are not satisfied with the
temperature settings, they can be adjusted by following these steps:
1.
Pull the Oven Temperature Control
Knob straight off.
2. Loosen the locking screws inside
the control knob. Note the posi-
tion of the notches.
NOTCHES TOOTH
3. To lower the temperature, move
the tooth a notch closer to LO.
Each notch equals about IOE
(5°C).
TOOTH
NOTCHES
4.
To raise the temperature, move
the tooth a notch closer to HI. Each
notch equals about 1O';F (5°C).
Tighten the locking screws and
replace the control knob.
8