Table of Contents
Advertisement
Replacing
Hold the surface
unit as level as
possible
with the terminal
just
started
into the receptacle.
Push
the surface
unit terminal
into the
receptacle.
2. Line up openings
in the reflector
bowl with the surface
unit recep-
tacle and the element
hold down
clip.
4. When terminal
is pushed
into the
receptacle
as far as it will go, push
down the edge
of the surface unit
opposite
the receptacle.
The ele-
ment hold down clip will keep the
surface unit from moving
around.
CAUTION:
Reflector
bowls
reflect
heat back
to the utensils
on the
surface
units. They also help catch
spills. When they are kept clean,
they reflect
heat better
and look new longer.
If a reflector
bowl gets discolored,
some of the utensils
may not be
flat enough,
or some may be too large for the surface
unit. In either
case, some of the heat that's meant
to go into or around
a utensil
goes down
and heats the reflector
bowl. This extra
heat can discolor
it. See Cooking
Guide
for further
information.
12
Advertisement
Table of Contents
