Table of Contents
Advertisement
Caring for your range
Control Panel and Knobs
1. Pull knobs straight off
2. Use warm soapy
water and a sofl cloth, or spray glass cleaner,
to wipe the
control
panel.
Rinse and wipe dry.
3. Wash control
knobs in warm soapy
water. Rinse well and dry.
4. Push control
knobs straight back on. Make sure they point to OFF.
Surface Units and Reflector Bowls
Removing
3. Pull the surface
unit straight away
from the receptacle.
2. Lift the edge
of the unit, opposite
the receptacle,
just enough
to
clear the element
hold down clip
and the reflector
bowl.
1. Lift out the reflector
bowl. See
"Cleaning
Chart" on page
15 for
cleaning
instructions.
II
Advertisement
Table of Contents
