PiXORD PD636 Quick Manual

PD636(E/W) Quick Guide
1. Hardware Connection
ND636(E/W) – Physical Overview
Focus Adjustment
ND636 E/W – Physical Connection
2. Software Installation
The following software is necessary for the proper display and use of the camera/video
server from the Web site. The software will be taken from the Software Package CD.
H.264 High Profile 2 Megapixel Fish-eye Panorama Network Dome Camera
IP Installer
The IP Installer is used to locate and configure network cameras and video servers in the LAN.
3. Network Configuration
Using IP Installer to Assign IP Addres s
1.Once IP Installer has been successfully installed on the PC, double click
to run the software.
1. Prepare a PC with Ethernet link to the network
2. Connect LAN port (RJ45) of the camera to a network
switch/hub
3. Connect power jack
4. Ensure the power adaptor specification matches the
power system (110V or 220V) and connect the adaptor
to the outlet
5. Check LED status (Power/Network)
2. Click the [Device Search] to search the device in the LAN.
3. Double click the select item to open
item to select the [Single Device Setting]
Single Device Setting
4. Modify the network settings of the camera. 5. After filling in the properties, click [Set]
192 . 168 . 2 . 115
255 . 255 . 255 . 0
0 . 0 . 0 . 0
80
168 . 95 . 1 . 1
168 . 95 . 1 . 1
168 . 95 . 1 . 1
Device Search
the Property Page or right click the
button to complete the configuration settings.
Set
V1.0