Table of Contents
Advertisement
46
Create RAID
•
SiS965L controller support RAID 0, RAID 1 and JBOD.
Creating a RAID 0 (Stripe) Array for Performance
•
SiS 180 enables users to create striped arrays with 2, 3, or 4 drives.
•
SiS965L only supports 2 SATA drivers to create a stripe array.
To create an array for best performance, follow these steps:
1
Press <A> to start creating a RAID array.
2
Press <2> and <Enter> to select RAID 0.
3
You will have two selections to create a RAID 0 array. The default
value is <1>. If you select <1>Auto Create, you can create a RAID 0
array faster and easier. The Blocksize will be selected by its default
value "64K". The result after creating will be show on step 8. Besides,
you also can select <2>Manual Create, see following steps.
4
Press <1>-<5> keys and <Enter> to select Block Size. (Default:64K)
46
Advertisement
Table of Contents
