Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Brush Wolf ALPHA
Summary of Contents for Brush Wolf ALPHA
- Page 1 Owner / Operator Instruction & Maintenance Manual — 1 — www.brushwolf.com...
-
Page 2: Foreword
Welcome to the Brush Wolf family of attach- ments. The Alpha Rotary Brush Cutter is engineered to cut brush and can cut trees up to 10 inches in diameter dependent upon the type of wood and the density of the vegetation. -
Page 3: Table Of Contents
Safety Section..................4 Operation Instructions..............6 Maintenance..................8 Maintenance Checklist..............10 Troubleshooting................11 Alpha XP & HD Parts Diagram...........12 Alpha XP & HD Parts List.............13 Parts List and Diagram - Drop Blade Carrier - 3 blade assembly......14 - Drop Blade Replacement Instructions.......15 Parts List and Diagram - Flat Blade Carrier - 4 flat blade assembly....16... -
Page 4: Safety Section
30 - 45 GPM (Gallons Per Minute). Any less GPM and the Alpha will not operate at peak proficiency. The Alpha HD is to be used on a skid steer with auxiliary hydraulic flow rated at 23 - 29 GPM (Gallons Per Minute). - Page 5 Do Not attempt to straighten blades. Order replacement blades if blades are bent, cracked or damaged. Do Not leave the Brush Wolf unattended while in a raised position. Always make sure both the runners are placed firmly on the ground and shut down the skid steer.
-
Page 6: Operation Instructions
30 GPM. All Alpha XP units are designed to operate on skid steers rated with auxiliary hydraulic flow of 30 - 45 GPM. Alpha HD is rated for skid steers with auxiliary hydraulics of 23 -29 GPM. - Page 7 THIS PAGE IS INTENTIONALLY BLANK — 7 — www.brushwolf.com...
-
Page 8: Maintenance
2. Check all nuts and bolts for proper tightness. See Maintenance Schedule. 3. Every Brush Wolf is tested at the factory and all nuts and bolts have been tightened to specifications. We recommend you check them after the first 4 to 6 hours of operation and at regular intervals as defined in the Maintenance Schedule. - Page 9 THIS PAGE IS INTENTIONALLY BLANK — 9 — www.brushwolf.com...
-
Page 10: Maintenance Checklist
Shut off the hydraulic power sup- ply and disconnect hydraulic couplers. Do Not loan your Brush Wolf to another skid steer owner. The potential exists for hydraulic contamination and could shorten the life of your skid steer or the hydraulic motor on your Alpha. -
Page 11: Troubleshooting
Troubleshooting Note: When performing maintenance, shut down the skid steer and remove all hydraulic hoses from the power source. Problem Check Loss of Power Low hydraulic fluid level Overheated hydraulic fluid* Contaminated hydraulic fluid* *May damage hydraulic motor Excessive Dull, broken or damaged blades Unit Vibration Blade carrier out of balance Loose nuts and bolts... -
Page 12: Alpha Xp & Hd Parts Diagram
Alpha XP or HD Parts Diagram — 12 —... -
Page 13: Alpha Xp & Hd Parts List
Parts List Model Alpha XP or HD ITEM ITEM QTY PART NUMBER DESCRIPTION 16253 WELDMENT, FRAME, ALPHA 15389 COVER, OMM,CORNER MOUNT, INTL STYLE 16525 HOSE WHIP ASSEMBLY, -6 ORFS, FEMALE SWIVEL COUPLINGS, 0.375 X 130.000 HOSE 15587 HOSE WHIP ASSEMBLY, -12 ORFS, FEMALE SWIVEL COUPLINGS, 0.750 X 114.000 HOSE 16271 PLATE, ACCESS, 2 HOLE, 9.000 DIA... -
Page 14: Drop Blade Carrier - 3 Blade Assembly
Parts List 15203 DROP BLADE CARRIER ASSEMBLY ITEM ITEM QTY PART NUMBER DESCRIPTION WELDMENT, BLADE CARRIER, 47.000 DIA X 1.000 PLATE, 15095 ALPHA 15272 SET OF 3 BLADES, 18.000 X 5.000 X 0.625 15101 BOLT, D-BOLT, 1 1/8-12, M-AX 15148... -
Page 15: Drop Blade Replacement Instructions
Standard Blade Assembly Drop Blade Maintenance - 3 blades 1. Perform maintenance on level surface with the Alpha blocked off the ground. Shut off the hy- draulic power supply and disconnect hydraulic couplers. 2. Tighten bolts of blades every use or every eight hours. Inspect blades. -
Page 16: Flat Blade Carrier - 4 Flat Blade Assembly
Parts List 15202 FLAT BLADE CARRIER ASSEMBLY ITEM ITEM QTY PART NUMBER DESCRIPTION 16200 ASSEMBLY, BLADE CARRIER, ALPHA, FLAT DISCS 15273 SET OF 4 BLADES, FLAT, 18.000 X 8.500 X 0.625 15099 PUCK, 3.500 DIA X 0.750, 3 HOLE 16148 WASHER, NORD-LOCK, 0.750 X 1.540 OD, ZINC... -
Page 17: Flat Balde Replacement Instructrions
1. Remove nuts and washers from plate on the cutter deck to expose access hole. For location of ac- cess hole - reference item #6 on the Parts drawing of the Alpha on page 14. 2. Through the exposed access hole rotate the blade carrier to line up the nut of the blade for access. -
Page 18: Dealer Checklist
SAFETY OPERATIONS CHECKLIST Auxiliary hydraulics rated for XP 30-45 GPM - or - HD 23-29 GPM. Explain and demonstrate operation of the Alpha Brush Wolf. Explain use and demonstrate use of Cab Safety Door. Explain and demonstrate bearing housing/lube level check. -
Page 19: Warranty Registration
Warranty Registration Form Thank you for choosing Brush Wolf. Please complete the form below to register your Brush Wolf prod- uct, you can also use the self-addressed Post Card insertion found in the packet attached to the Brush Wolf or there is a form available to fill out on-line at www.brushwolf.com. Please complete the War- ranty Registration form within 30 days of purchase date to qualify for warranty. -
Page 20: Warranty Information
WARRANTY INFORMATION: The Warranty Claim Form must be completed in full detail and received in good condition. Cross-Tech Manufacturing, Inc. limits its warranty to the hydraulic motor for eighteen months (18), bearing housing and cylinders for a period of one year from the original date of sale. A three (3) year warranty is includ- ed on the structural steel from the date of sale.
Need help?
Do you have a question about the ALPHA and is the answer not in the manual?
Questions and answers