Instructions For Installation - Haverland ECORADi Series Instruction & Installation Manual

2. INSTRUCTIONS FOR INSTALLATION

• Before the first switch on for the coming winter or when the
heater has not been used for several days, the unit should be
cleaned (follow the steps given in the "maintenance section".This
cleaning operation will avoid burning the accumulated dust and
other remains.
• This radiator CAN'T OPERATE with external programmable
controllers or any other exterior control device.
• CAUTION: Keep bags and other accessories well out of the
reach of children.
• The convection effect, together with other ambient factors, can
cause discolouring to metal surfaces and to plastics.
• Temperature differences can cause crackling and other noises in
the unit. This does not indicate any failure in the radiator.
• When the radiator is disposed of, the requirements established
by current legislation on waste processing and recycling shall be
taken into account.
IMPORTANT
• It is important that the radiator IS FIXED FIRMLY TO A SOLID AND LEVELLED WALL.
• Make sure that there is a socket near the area where you are going to place it.
• Take out the wall pattern from the box to see the exact positions of the necessary drill
holes.
• You must keep a minimum distance of 15 cm between the radiator and any object, wall
or combustible material.
ECORADi
6