Installation; Outdoor Unit Installation - Samsung AC HCADKH Series Installation Manual

INSTALLATION

Outdoor unit installation
The outdoor unit must be installed on a rigid and stable base to avoid any increase in the noise level and vibration,
particularly if the outdoor unit is to be installed in a location exposed to strong winds or at a height, the unit must be fixed to
an appropriate support(wall or ground) .
Fix the outdoor unit with anchor bolts .
• The anchor bolt must be 20 mm or higher from the base surface .
NOTE
Anchor bolt hole
620
940
• Make a drain outlet around the base for outdoor unit drainage .
• If the outdoor unit is installed on the roof, you have to check the ceiling strength and waterproof the unit .
CAUTION
Outdoor Unit Support
OUTDOOR UNIT INSTALLED ON THE WALL BY RACK
- Ensure the wall will be able to suspend the weight of rack and outdoor unit ;
- Install the rack close to the column as much as possible ;
- Install proper grommet in order to reduce noise and residual vibration
transferred by outdoor unit towards wall .
When installing air guide duct
• Check and make sure that screws do not damage the copper pipe .
CAUTION
• Secure air guide duct on guard fan .
CAC_Global Duct Latin America_IM_EN_04680A-02.indd 10
(Unit : mm)
ENGLISH-10
Outdoor
Unit
Outdoor Unit
Anchor bolt
Support
Base Surface
Designed to cut off
residual vibration
from outdoor unit
to rack .
(not supplied with
product)
Soft rubber designed to cut off
vibration from rack to wall .
(not supplied with product)
2014-09-04 오전 9:17:09