Setting The Clock - Whirlpool FGS395Y Use And Care Manual

Audible signals
Audible signals are available to guide you when
setting and using your range. A beep will sound
each time you touch a command button. Three
beeps signal the end of the electronic Timer
function.
To remove audible signals:
l
Push and hold the STOP TIME button until
you hear two beeps.
l
Audible signals are now removed.
To replace audible signals:
l
Push and hold the STOP TIME button until
you hear one beep.
l
Audible signals are now replaced.
Setting the clock
1. Push the Clock button. TIME will show in the
display.
2. Turn the Time/Temp Set Knob until the
correct time shows in the display.
3. Push the Cancel button to start clock opera-
tion. The clock will start
30
seconds after
setting the time.
TlMElTEMP
SET
I
CANCEL
@B
12