Advertisement
4. Move the Lock Lever to the right - the
Clean position. The Clean Indicator Light
will come on.
5. After the Self-Cleaning
cycle is started,
the Lock Indicator Light comes on when
the oven temperature
goes above normal
baking/roasting
temperatures.
The door
cannot be opened and the Lock Lever
must not be moved when the Lock
Indicator Light is on.
6. After the Self-Cleaning
cycle is com-
pleted and the oven reaches normal
baking/roasting
temperatures,
the Lock
Indicator Light will go off. Move the Lock
Lever back to the left. DO NOT FORCE
IT. Wait until it moves easily. Turn the
Oven Selector and Oven Temperature
Control clockwise
to OFF. The Clean
Indicator Light will go off.
7. After the oven is cool, wipe off any
residue or ash with a damp cloth. If
needed, touch up spots with a soapy,
steel-wool pad.
To stop
the Self-Cleaning
cycle
at any time:
1. Push in and turn the Stop Time Knob
clockwise
until it points to the correct
time of day.
2. Turn the Oven Selector and Oven
Temperature
Control to OFF. When the
Lock Indicator Light goes off, move the
Lock Lever back to the left. DO NOT
FORCE IT. Wait until it moves easily.
Special
tips
l
Keep the kitchen well ventilated during the
l
If the Self-Cleaning
cycle does not get
Self-Cleaning
cycle to help get rid of heat,
the oven as clean as you expected,
the
odors, and smoke.
cycle may not have been set long enough
l
After the oven is cool, wipe up any
or you may not have prepared the oven
residue or ash with a damp cloth or
properly. Set the Self-Cleaning
cycle
sponge. If any spots remain, clean with a
longer the next time and hand-clean
areas
mild abrasive cleanser or cleaning sponge.
noted on page 20.
l
Clean the oven before it gets heavily
soiled. Cleaning a very soiled oven takes
longer and results in more smoke than
usual.
22
Advertisement
