Introduction; Description; Options - Black Box RM470A Manual

SERVSHIELD

2.1 Description

The ServShield protects your computer hardware in manufacturing environments and other industrial areas
subject to harsh conditions.
The cabinet is constructed of 16-gauge steel and it holds 600 lb. (272 kg)of equipment. The cabinet is
preassembled, so it's easy to set up and use. Cabinet components include: upper, clear Plexiglas
steel middle keyboard drawer; steel perforated lower front door with dust filter; steel rear door furnished with
fan assembly and dust filters; solid pair of side panels, removable from the inside; two 1.5" (3.8-cm) diameter
cable-access provisions on the top and bottom of the enclosure; one vented stationary shelf for mounting the
monitor (200-lb. [90.8-kg] weight capacity); rubber feet and leveling glides. All doors have compression latches
and locks. Cabinet dimensions are 72"H x 26"W x 26"D (182.9 x 66 x 66 cm).
The top Plexiglas door and the middle keyboard door are keyed alike. The bottom front door and the rear
door are also keyed alike; however, they're different from the top Plexglas door and the keyboard door.

2.2 Options

You may also need the following options:
• 19" (48.3 cm) Sliding, Adjustable Tower Shelf (RM471)—At 19" (48.3 cm) high and 22" (55.9 cm) deep,
this shelf holds network hardware weighing up to 110 lb. (49.9 kg).
• Rear fan filter (RM475)
• Front door filter (RM476)
4

2. Introduction

® door; isolated