Table of Contents
Advertisement
3.7 Mounting Rails
Two pairs of vertical mounting rails (zinc-plated, 12-gauge steel) are in the top and bottom of the ServShield
enclosure. The upper rails have 14U (24.5") of rack mounting space and the bottom rails have 17U (29.75") of
rack mounting space. The rails are tapped with #10-32 threads. The rails adjust front to rear in 1" (2.54-cm)
increments.
• •
• •
Figure 3-3. Replacing the Door Filter.
• •
• •
• •
• •
•
• •
• •
Figure 3-4. Mounting Rails.
Horizontal Bracket
•
• •
• •
• •
• •
• •
• •
• •
SERVSHIELD
Bottom
Front Door
Filter
Filter Bracket
Wing Nut
EIA Rail
•
• •
• •
• •
• •
• •
Position EIA rail in
desired location
(can be located on
1" increments) and
secure to horizontal
brackets using
#10-32 screws
7
Advertisement
Table of Contents
