Fujitsu LifeBook P1610 Technical Procedure page 2
Upper case replacement
Hide thumbs
Also See for LifeBook P1610:
- User manual (128 pages) ,
- Bios manual (28 pages) ,
- Technical procedure (9 pages)
Advertisement
5. Extract 11 screws from the lower
case.
7. Open the LifeBook and lay it flat.
9. Lift the top edge of the keyboard
up and turn it over
11. Tilt the Display up and rotate it ¼
turn.
6. Extract 2 screws from the rear of
the LifeBook.
8. Use a plastic pry tool to remove
the keyboard upper trim.
10. Disconnect the keyboard and
ClickPoint cables from the system
board by pulling them gently.
12. Slide out the lower hinge cover.
Advertisement
