Fujitsu LifeBook P1610 Technical Procedure page 2
Fingerprint sensor replacement
Hide thumbs
Also See for LifeBook P1610:
- User manual (128 pages) ,
- Bios manual (28 pages) ,
- Technical procedure (9 pages)
Advertisement
5. Gently slide the pry tool between
the screen and the front cover to
release the tape.
7. Extract 2 screws from the
Fingerprint Sensor board.
9. Connect the cable to the new
Fingerprint Sensor board and place it
into the rear cover.
11. Press the front cover into place
and secure it with 8 screws.
6. Lift the front cover off.
8. Disconnect the cable from the
board and lift it out.
10. Secure it with 2 screws.
12. Place 8 screw covers over these
screws.
Advertisement
