Advertisement
LH OUTGOING CIRCUITS RH OUTGOING CIRCUITS
FED FROM:
INCOMING CABLE SIZE:
INSTALLATION DATE:
CONTRACTOR:
Warning -
Intellectual Property Rights
Eaton wishes to make it clear that it
owns intellectual property rights in the
product which it manufactures (whether
or not listed in this leaflet) and that it will
take legal action against any party
found to be manufacturing, using, or
selling any article which infringes the
company's intellectual property. All
marks in this document identified with
an R symbol or a TM symbol adjacent
to the mark are trademarks of Eaton.
© 2019 Eaton Electric Limited,
All rights reserved.
TOP ENTRY
Panelboards are supplied
ready for bottom entry.
For top entry convert as
shown below.
Alternative Earth position
(both sides)
Main
Cover
Prior to cabling, check pan
assembly alignment with
main cover
LABEL FITTING
TOP FEED ADAPTOR FITTING EPBKTFN3
KEY LOCK FITTING
EPBDLK1
Ensure all way labels are fitted in the correct places
BOTTOM FEED
L1
L1
Cover Way
Labels
Cover Way
Labels
Main Switch
Label
The use to which this product is put and its place of installation is outside our
control. Particular care should therefore be taken to follow the instructions given
here and to ensure their continued availability in conjunction with the use of the
product.
No responsibility can be accepted by us if these instructions are disregarded.
Further copies of these instructions and information concerning the installation
and proper use of this product can be obtained by contacting the:
Technical Services Department
Eaton Electric Limited, Middleton, Manchester. M24 7GQ.
Tel: +44(0)8700 545 333,
email: ukcommorders@eaton.com
www.eaton.com/recycling
Rotate Inner Cover
and Pan assembly
0
180
TOP FEED
L1
Phase
Label
Earth
Labels
Busbar
Way
Label
L1
Earth
Labels
Busbar
Way
Label
Phase
Label
Main Switch
Label
Cover Way
Labels
Cover Way
Labels
Adaptor
Shields
Advertisement
