C.ITOH 8510A User Manual page 10

3-2. Frinction Feed (roll paper and sheet paper)
(1)
Open the paper cutter, and pull the roller shaft toward the front.
(2)
Move the head carrier to the left end.
(3)
Turn the release lever toward the rear.
(4)
Insert the paper into the paper inlet on the paper cover (behind the paper cover for roll paper).
When the paper end appears on the platen, set the paper properly, turn the release lever toward
the front (to the "friction feed" position), and reposition the roller shaft and paper cutter.
(See Fig. 10.)
Paper
Roller Shaft
Roller Paper Inlet
-:;;::~~Icl--"..4-_
Paper Cutter
Release Lever
Fig. 10
-8-