Fujitsu LifeBook P1610 Technical Procedure page 4

21. Extract 1 screw from the
Bluetooth board and lift it out.
23. Connect the Bluetooth ribbon
cable, the Bluetooth antenna cable
and the IO Board ribbon cable.
25. Close the external VGA
connector cover and secure the
upper case with 4 screws.
27. Secure the display with 2 screws
in the hinge.
22. Transfer the ribbon cable from
the defective board, insert the new
one and secure it with 1 screw.
24. Place the upper case and
connect the ClickPoint button cable
and the speaker cable.
26. Extract 3 screws from the PCB.
28. Attach the 2 display cables to
the system board and the 2 antenna
Cables to the WLAN card.