Kobalt KPW 2N1 Manual page 9

ASSEMBLY INSTRUCTIONS
5. Slide spray gun holster (M) into place on the
upper handle (B).
6. Place power washer unit (F) into position on the
lower frame (G).
7. Pull back on collar at one end of soft PVC hose (N).
Push firmly to connect hose to spray gun (K). Twist
collar to secure. Confirm hose is locked into spray
gun by slightly pulling on them. The hose is now
securely attached to spray gun.
5
M
6
G
7
N
1
9
K
2
3
N
kobalttools.com
B
F