Operating Instructions - Kobalt KPW 2N1 Manual

OPERATING INSTRUCTIONS

• Turn on water supply at the faucet.
• Make sure the power switch is off (light will be off).
• Unwind the power cord completely and plug
into a grounded 120 volt outlet.
• Turn the safety lock button on the spray gun to unlocked.
While pointing the spray gun in a safe direction, squeeze
the trigger on the spray gun until there is a steady stream
of water, letting the water and air out of the hose.
• Push the power button to turn the unit on (green power
light will turn on). The unit will turn on for 1 - 2 seconds
and shut off. This is a normal function of the auto start
feature. Squeeze the spray gun trigger to begin pressure
washing. Begin power washing by squeezing the trigger
on the spray gun all the way into the handle. Release
the spray gun trigger to stop the power washer. Allow the
motor to come to a complete stop before squeezing the
trigger again.
• Squeezing rapidly will cause the auto start feature to
miss an on/off cycle that may prevent it from turning on
while squeezing trigger after rapid squeezing. Use slow
deliberate trigger pulls to avoid such symptoms.
OFF
13
Unlock
F
ON
kobalttools.com