Kobalt KPW 2N1 Manual page 11

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
11. To remove nozzle (E), pull back on collar of
lance (I) and pull out nozzle.
12. Pull upward on latches that are located on
sides of lower frame (G). Once upper latch is
flush, push down until lower latch clicks into
place.
13. Pull back on collar at the other end of soft PVC
hose (N). Push firmly to connect hose. Twist
collar to secure. Confirm hose is locked into
power washer unit by slightly pulling on hose.
The hose is now securely attached.
11
12
G
F
13
N
11 11
I
2
E
1
F
kobalttools.com
N