Table of Contents
Advertisement
I N T R O D U C T I O N & S P E C I F I C AT I O N S
1.0
INSTRUCTIONS FOR USE OF MANUAL SECTIONS
Section
Table of Contents & Introduction ..................................................... 2
Symbols & Decals
................................................................... 3
Safety Instruction
................................................................... 4 - 5
Pre-Operation Checklist ..............................................................6 - 8
Operation & Parts
................................................................... 9 - 15
Related Products
..................................................................... 16
Warranty & Service
............................................................. 17 - 18
Foreword/Introduction
The owner's manual is intended to point out some of the basic safety situa-
tions that maybe encountered during the normal operation & maintenance
of the U.S.SAWS MARK III Machine & to instruct you in safety practices for
dealing with these conditions. Keep all manuals provided with your
machine in a safe place at all times.
The information and specifications included in this publication were
in effect at the time of approval for printing. U.S.SAWS reserves the right,
however, to discontinue or change specifications or design at any time with-
out notice and without incurring any obligation.
The U.S.SAWS Mark-III is a high preformance, high precision saw designed
to clean out control joints, remove old joint filler, and make straight accurate
cuts in concrete up to 2" deep.
Typical applications for the U.S.SAWS MARK III are to clean out control
joints, remove old joint filler, and make straight accurate cuts in concrete
up to 2" deep. A specially designed blade guard allows the operator to
see the blade yet still covers 98% of it for excellent dust control and a high
drgree of accuracy. Blade depth is fully adjustable and has a depth lock to
prevent over cutting. The concrete cleanout saw fully
diamond blade speed regulations.
TO PREVENT SERIOUS INJURY DO NOT OPERATE SAW WITHOUTPROPER TRAINING AND.
Read this entire operations and maintenance manual before using your new
UNDERSTANDING OF THE OWNERS MANUAL
tool. Pay close attention to the Rules for safer operation,
WHEN OPERATING THIS MACHINE
Dangers, Warnings and Cautions.
The purpose of safety symbols and explanations are to attract your atten-
tion to possible hazards and how to avoid them. The safety symbols and
explanations do not by themselves eliminate any danger. The instructions
or warnings they give are not substitutes for proper accident prevention
measures.
ALWAYS WEAR SAFETY APPROVED
complies with ANSI
HEARING PROTECTION
EYE OR FACE PROTECTION
PROTECTIVE HELMET
PROTECTIVE GLASSES OR FULL FACE PROTECTION
Surface Prep
Division
WEAR HAND PROTECTION
Page
DANGER: Indicates an imminently hazardous situation that if not
avoided, will result in death or serious injury. This signal word is lim-
ited to the most extreme situations.
WARNING: Indicates a potentially hazardous situation that, if not
avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation that, if not
avoided may result in minor or moderate injury. It may also be used to
alert against unsafe practices that may cause property damage.
2.0
SPECIFICATIONS
Production rates vary but a good operator can easily clean out 10,000 linear
feet of new, unfilled joints in an 8-hour shift.
MADE IN USA 25 Year Warranty on Chassis
Model
Part Number
Grinder Make/ Model
Output Power
Max RPM
Power Requirments
Max Cutting Depth
Blade Diameter
P: 877-817- 6687 F: 813-621-7125
Visit us at www.ussaws.com
sales@ussaws.com
MarkIII Dust Buggy
SX13700
Metabo W24-230
15 Amp Electric
6,600
115V, 60Hz
2"
7" or 8"
Dry Diamond
2
Advertisement
Table of Contents
