Advertisement
I N T R O D U C T I O N & S P E C I F I C AT I O N S
1.0
INSTRUCTIONS FOR USE OF MANUAL SECTIONS
Section
Table of Contents & Introduction ..................................................... 2
................................................................... 3
................................................................... 4 - 5
Assembly & Operation ..................................................................... 7
Parts Breakdown ...................................................................... 8 - 9
............................................................. 10 - 11
Foreword/Introduction
The owner's manual is intended to point out some of the basic safety situa-
tions that may be encountered during the normal operation & maintenance
of the U.S.SAWS FSB-150 Machine & to instruct you in safety practices for
dealing with these conditions. Keep all manuals provided with your
machine in a safe place at all times.
The information and specifications included in this publication were
in effect at the time of approval for printing. U.S.SAWS reserves the right,
however, to discontinue or change specifications or design at any time with-
out notice and without incurring any obligation.
The FSB-150 walk-behind air saw is designed for simple operation and has
been proven to be extremely useful and versatile. Up to a 20" diameter
diamond blade may be mounted on the saw if it is rated and approved for
operation at 3,300 RPM. READ, AND CAREFULLY FOLLOW THE OPERATING
AND SAFETY INSTRUCTIONS OF THIS OPERATING AND SAFETY INSTRUC-
TION MANUAL BEFORE USING THIS PRODUCT. Since safety regulations
can vary between different countries and states, you must contact proper
authorities and follow all appropriate regulations
Read this entire operations and maintenance manual before using your new
tool. Pay close attention to the Rules for safer operation,
Dangers, Warnings and Cautions.
The purpose of safety symbols and explanations are to attract your atten-
tion to possible hazards and how to avoid them. The safety symbols and
explanations do not by themselves eliminate any danger. The instructions
or warnings they give are not substitutes for proper accident prevention
measures.
........................................................... 6
Waterworks
Division
Page
DANGER: Indicates an imminently hazardous situation that if not
avoided, will result in death or serious injury. This signal word is lim-
ited to the most extreme situations.
WARNING: Indicates a potentially hazardous situation that, if not
avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation that, if not
avoided may result in minor or moderate injury. It may also be used to
alert against unsafe practices that may cause property damage.
2.0
SPECIFICATIONS
Model
Part Number
Power Source
Air Requirements
RPM
Max Cutting Depth
Dia. Blades Used
Weight
P: 866-987-7297 F: 813-621-7125
Visit us at www.ussaws.com
sales@ussaws.com
FSB-150
US60050
Gear Box
min 90 cfm @ 90 psi
3,300
7.5"
20" Maximum
144 lbs
2
Advertisement
