idesk POMMERAC SLED Assembly Instructions

Assembly Instructions
POMMERAC SLED
A
B
Assemble back shell onto chair
2
frame.
A
B
Install screws into chair frame and
4
tighten with hex wrench.
C
Item
A
B
C
D
2.5mm
Warning
1. Product is for single person use only.
2. Do not use this chair unless all bolts and knobs are securely tightened.
3. Check that all bolts and knobs are tightened every six months
or as needed.
4. Dispose of packing material properly. Do not use plastic cover as a head
covering. Suffocation may result.
5. Do not use this chair as a stepladder.
For assistance, call (888) 471-1616, or www.youtube.com/user/ideskinc1
Put chair frame on a hard level surface.
1
Align holes in back shell with threaded holes in chair
3
frame. If holes do not align, press back shell as
shown.
5
Part Name Part #
Back Shell G00086
Chair Frame G00087
Screws G00088
Hex Wrench G00091
B
Hard level surface
Qty
1
1
2
1