Westfalia 961151 Instruction Manual page 22

Learning the floodlight, Type EH151
To send the command to the
floodlight, hold
detector and the floodlight close
together. Hold the learning key
of the floodlight pressed and
observe the LED.
1. Press the learning key until
the LED of the floodlight
starts flashing. Now you
have totally 30 seconds to
emit the command.
2. Press the contact switch on
the bottom side of the mo-
tion detector as long as the
LED of the floodlight starts
glimmering and than turns
off. This indicates that the
command signal has been
emitted.
3. If the floodlight continuously
flashed after learning proc-
ess, it indicates that either the
batteries of the motion detec-
tor are spent or that the rear
cover of the motion detector
is not tightened. As long as
the rear cover is not screwed
the motion detector will emit a
signal to the lantern.
Learning
the motion
17
LED
Contact Switch
Learning Key