Rosslare CP-R25 Hardware & Software Manual page 16

Installation
Figure 10: AS-B01 Connectivity – Connected
The event log displays a connected message.
When the hardware and software are disconnected the
connectivity icon is Red and the event log displays a
disconnected message. The Software can only function in
demonstration mode.
If the indicator does not turn green, and the description still
indicates Disconnected after the USB cable is connected,
try disconnecting the USB cable from the Desktop
Programmer and reconnecting it.
Once the indicator is green and the description is
Connected the CP-R25 Desktop Programmer is now ready
for use.
Page 15 CP-R25 Hardware & Software Manual