Table of Contents
Advertisement
Installation
3.4 CP-R25 Hardware Installation
The CP-R25 does not require special installation; follow the
following steps to prepare the unit for enrollment.
Note:
Before connecting the CP-R25 hardware ensure that the
ASB01 software is installed.
Connecting the CP-R25 requires two steps. First the AS-B01
software must be operating, and then the CP-R25 can be
connected.
To connect the CP-R25:
1. Click on the AS-B01 icon on the desktop, or select the
program from the Rosslare folder in the "Start" menu. The
Login dialog is displayed.
2. Enter a password. The default password is "admin". The AS-
B01 software Main window is displayed. Make sure to
change the default password after the first time the
software is activated to the company approved secret
password. The Main window is displayed.
Page 13
Figure 8: AS-B01 Login Dialog
CP-R25 Hardware & Software Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the CP-R25 and is the answer not in the manual?