Caring For Your Oven; Control Panel And Command Buttons - Whirlpool SB160PEX Use & Care Manual

Self-cleaning gas built-in oven
Table of Contents

Advertisement

Caring For Your Oven
Burn, Electrical
Shock, Fire and Explosion
Hazard
l
Make sure all controls
are OFF and the
oven is cool before cleaning.
l
Do not use oven cleaners,
bleach or rust
removers.
l
Do not use gasoline
or other flammable
liquids
or vapors to clean this or any
other appliance.
l
Do not use your oven for storage.
l
Keep the appliance
area clear and free
from combustible
materials,
gasoline
and
other flammable
vapors and liquids.
l
Do not obstruct
the flow of combustion
and ventilation
air.
Failure to follow these guidelines
could
result in burns, electrical
shock, fire or
explosion.
Control panel and command
buttons
1. Pull command buttons straight off.
2.
Use warm, soapy water or spray glass cleaner
and a soft cloth to wipe the control panel.
Rinse and wipe dry with a soft cloth.
3. Wash command buttons in warm, soapy
water. Rinse well and dry with a soft cloth. Do
not soak.
4. Replace command buttons by pushing them
firmly into place.
NOTE: When cleaning, never use steel wool,
abrasives, or commercial oven cleaners which
may damage the finish. After cleaning, make sure
you have not turned oven on when replacing
buttons. If oven has been turned on, push Cancel
button.
18

Advertisement

Table of Contents
loading

Table of Contents