mabe MKR62GWTWB Service Manual page 14

STANDARD REAR EXHAUST
We recommend that you install your dryer before installing your washer. This will permit direct access for
easier exhaust connection.
Slide the end of the exhaust duct on the back of the dryer and secure with duct tape or a duct clamp.
NOTE: We strongly recommend using rigid metal exhaust duct. However, if flexible ducting is used it must
be UL-Listed metal, not plastic.
• For straight-line installation, connect the dryer exhaust to the wall, using duct tape or a duct clamp.
Service Engineering
- 14 -