mabe MKR62GWTWB Service Manual page 11

For electrical connections using a power cord:
Disconnect power before making electrical connections.
Connect neutral wire (white or center wire) to center terminal.
Ground wire (green or bare wire) must be connected to green ground connector.
Connect remaining two supply wires to remaining two terminals.
Securely tighten all electrical connections.
Replace the terminal block cover.
GROUNDING INSTRUCTIONS
:
For a grounded, cord-connected dryer This dryer must be grounded. In the event of a malfunction or
breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric
current. This dryer uses a cord having an equipment-grounding conductor and a grounding plug. The plug must
be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
WARNING
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a
qualified electrician, or service representative or personnel, if you are in doubt as to whether the appliance is
properly grounded. DO NOT modify the plug on the power supply cord. If it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
For direct wire connections:
Use 10-gauge copper wire.
Use a strain relief.
Disconnect power before making electrical connections.
Connect neutral wire (white or center wire) to center terminal.
Ground wire (green or bare wire) must be connected to green ground connector.
Connect remaining two supply wires to remaining two terminals.
Securely tighten all electrical connections.
Replace the terminal block cover.
Failure to do so can result in death, fire or electrical shock.
GROUNDING INSTRUCTIONS
For a permanently connected dryer: This dryer must be connected to a grounded metal, permanent wiring
system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the
equipment-grounding terminal on the appliance.
WARNING Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician, or service representative or personnel, if you are in doubt as to whether the
appliance is properly grounded.
Service Engineering
- 11 -