Activating The Electrical System In An Emergency - Honda CBR1000RR Fireblade 2021 Manual

Activating the Electrical System in an Emergency

The mechanical key and ID tag can be used
to activate the electrical system when the
electric system cannot be turned on because
the Honda SMART Key battery becomes
weak or dead.
#
Set up to ID number input mode
Remove the front seat using a 5 mm Hex
1.
wrench provided in the tool kit.
To access the tool kit, remove the rear
u
seat. P. 150
2
Remove the fuse box cover.
2.
Pull out the SMART ECU fuse with the
3.
fuse puller and wait about 2 minutes
before insert the SMART ECU fuse again.
Push and hold the ignition ON switch for
4.
more than 4 seconds.
The steering lock indicator comes on
u
and the system enters the ID number
input mode.
194
Check the ID number on the ID tag.
5.
P. 202
2
SMART ECU fuse
ID number