OLYMPIA FAUCETS, INC.
Interchange City Distribution Center #20
1277 Heil Quaker Boulevard
La Vergne, TN 37086
(888) 772-7701
www.olympiafaucets.com
Model Number: L-6050, L-6051, L-6052, L-6050-
WD, L-6051-WD, L-6052-WD (CP, BN)
Warnings and Notes:
Check with local plumbing code requirements before installation.
This product should be installed by a local listed plumber.
Do not use plumbers putty on threads.
Installation Steps:
Single Handle Lavatory Faucet
(1) Shut off water supply. Remove old faucet.
Clean mounting surface in preparation for new
faucet.
(2) For 1-Hole Installation:- Install mounting
bolt. Place the faucet in position on the sink.
Place washer under the faucet. From under the
slide mounting washer and mounting bracket
through mounting bolt. Install the locknut to the
mounting bolt..
(3) For 3-Hole Installation:- Install mounting
bolt. Place the faucet in position on the sink.
Place washer and deck plate under the faucet.
From under the sink slide mounting washer
and mounting bracket through mounting bolt.
Install the locknut to the mounting bolt..
(4) Connect hot and cold inlet supply hoses to
supply stops. For 1/2" connection use 3/8" male
to 1/2" female adapter for installation. Adapters
are optional and not provided with the faucet.
(5) Turn on Faucet. Check for any minor joint
leaks.
Tools:
Adjustable Wrench
Plumbers Putty
Pop-up Drain Installation:
INSTALLATION
Sealant Tape
(1) Remove pop-up flange from body
(2) Place a ring of putty on the bottom of
flange.
(3) Insert pop-up flange through drain
hole and attach flange to body. Ensure
the pop-up outlet faces towards the sink.
Do not overtighten.
(4) Connect the trap (check
manufacturer's instructions for
installation).
(5) Insert rod. Tighten the pivot ball nut.
Rags
Need help?
Do you have a question about the L-6050 and is the answer not in the manual?
Questions and answers